wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 1 single coil hall effect ic with thermal lock protection and auto-restart features: operate from 2.8v to 14v supply voltage. on-chip hall sensor. internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. output sinking capability up to 350ma for driving large load. lower current change rate reduces the peak output voltages during switching. available in rugged low profile sip-4l,sip-5l and sot-25 packages. built-in frequency generator. built-in protection diode for reverse power supply fault. prevent the fail situation during lock status or high temperature built-in thermal lock protection and auto-restart function. general description: wsh42fb is designed to integrate hall sensor with two push-pull output drivers and frequency generator together on the same chip, it is suitable for single coil dc brushless motors. it includes a temperature compensated voltage regulator, a differential amplifier, a hysteresis controller, complementary bi-direction drivers for sinking and driving large current load and an open-collector frequency generator capable of sinking 10ma current load. an on-chip protection diode is implemented to prevent reverse power fault. it also includes coil parts. you can eliminate all the external components for the function of fg and reverse protection diode. and built-in thermal lock protection and auto-restart function will automatically shutdown power at 110 c to prevent the coils be damaged during high temperature and auto-restart at 105 c. it can replace the function of lock protection and auto-restart at low cost. wsh42fb are rated for operation over temperature range from C 20 ? c to 90 ? c and voltage ranges from 2.8v to 14v.
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 2 name p/i/o pin# description vcc p positive power supply dob o output pin #1 do o output pin #2 vss p ground name p/i/o pin# description vcc p positive power supply dob o output pin #1 do o output pin #2 fg o frequency generator vss p ground name p/i/o pin# description vcc p positive power supply vss p ground fg o frequency generator do o output pin #2 dob o output pin #1 supplyvoltage vcc --------------------------14v fg breakdown voltage vfg ------------------------- 14v magnetic flux density b --------------------------unlimited reverse protection voltage vr--------------------------8v output on current (continuous) ic --------------------------350ma fg on current (continuous) if -------------------------- 10ma operating temperaturerange ta--------------------------(-20 ? c to +90 ? c) storage temperaturerange ts--------------------------(-65 ? c to +150 ? c) package power dissipation pd -------------------------- 350mw for sot-25 500mwforsip-4l 500mw for sip-5l
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 3 (t=+25 ? c,vcc=2.8v to 14v) characteristic symboltestconditions min typmaxunits supply voltage vcc v output saturation voltage vout(sat) vdrive+vsink vcc=5v, io=200ma v fg saturation voltage vfg(sat)vcc=5v,if=5ma b > bop v output leakage current ileakagevcc=5v, b < brp < ua supply current isupplyvcc=5v, io=200ma fg on ma characteristics symbolquantity ta= -20 ? c to +80 ? c min typ. max unit operate point bop grade a grade b 35 70 50 100 gauss release point brp grade a grade b -70 -35 -100 -50 gauss hysteresis window bop-brp 70 150gauss
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 4 sip -4l: wsh42fb-xpa elec.grade sip -5l: wsh42fb-xpc sip-4l & sip-5l: sot-25: wsh42fb-xpd 1 :a grade (70 gauss) 2 : b grade (100 gauss) sot-25: 1 :agrade(70gauss) 2 : b grade (100 gauss) elec. grade 1. sip-4l
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 5 2.sip-5l 3. sot-25
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 6 1. sip-4l
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 7 2. sip-5l
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 8 3. sot-25
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 9 1. sip-4l figure1. 2.sip-5l figure2.
wsh42fb winson reserves the right to make changes to improve reliability or manufacturability. ? winson,2005/9/23 10 3-1. sot-25 figure 3. 3-2. sot-25 figure 4.
|
